

Construct a smart turret with joystick control! This kit teaches servo motor mechanics, angle calculation, and sensor-based targeting through a hands-on build experience. Use the joystick to aim and the trigger mechanism to fire. A fantastic introduction to control systems and embedded programming.
Build Time
5-7 Hours
Parts Count
40+ Components
Languages
C++ / Arduino
Controller
Arduino Compatible
Dimensions
20×15×18cm
Weight
420g
Battery
AA Cells
Control
Joystick
Motors
2× Servos
Languages
C++ / Arduino
Master servo mechanics, control systems, and precision targeting algorithms.
Servo motor control, joystick input reading, and trigger circuit design.
Mapping joystick values to servo angles, implementing control loops.
Turret assembly, pivot mechanisms, and stable base construction.
Angle calculation, trigonometry basics, and coordinate mapping.
Turret Body & Base
×1 setServo Motors
×2 (pan & tilt)Joystick Module
×1Arduino Board
×1Trigger Mechanism
×1Battery Holder
×1USB Cable
×1Wiring & Connectors
×1 setAssembly Tools
×1 setBuild Guide & Code
×1Estimated total: 5-7 hours from unboxing to targeting
Identify all components and organize parts. ~20 min.
Construct the stable base and mount the turret pivot. ~2 hours.
Connect servos, joystick module, and program control logic. ~2 hours.
Fine-tune servo ranges and joystick sensitivity. ~1 hour.